Venue Equipment
General
DI Boxes
- 4 × Passive DI Box (TS input, XLR output)
Stage Box
Microphones, Cables & Stands
- 2 × Vocal Microphones (Preferred models: sE V7, Shure SM58, Shure Beta58A, or similar)
- 2 × Tripod Boom Microphone Stands
- 2 × XLR–XLR Cables (Minimum 5 meters each)
Power Supply
- 2 × Standard Power Outlet (one on each side of the stage)
Drums
- Acoustic drum kit (22/24″ kick + 16″ Floor Tom + 13″ and 12″ Tom’s
- 4 × Boom stand for cymbal’s
- 2 × Straight stand for cymbal’s
- Anti-slip carpet for drum kit
- Drum microphones kit (kick + 3 × tom’s + snare (Shure SM57 or similar) + 2 × overhead’s)
Sound
- 2-4 × PA Active 12/15″ speakers (min. 350W RMS)
- 1-2 × Active subwoofer 15/18″ (min. 700W RMS)
Min. Required Light
- 2-4 × PAR’s
- 2 × Moving head’s
- 2 × Led’s
- 1-2 × Smoke generator
Our Setup
- 2 Guitars
- 2 Vocals
- Bass
- Drums
- Stereo Backtrack
We’re bringing our own Guitar Amplification, Guitar Cabs and a Bass Combo. We do no not take sound from the speakers via mics, we’re sending processed signals (with cab sims) from our Processors directly to the venue’s stage box.
We are using our own monitoring rack (IEM-Rack).
Vocals, instruments, kick, and snare will be routed through our splitter unit, and sent 2 ways: through our multicore into the venue’s stage box and to our own Digital Mixer for our own Monitoring).
Additional Note:
If Front of House (FOH) has the capability to route the processed drum group back to stage via an AUX send – this would be ideal.
Backup Gear Requirements
In Case of Equipment Failure or Transport Issues
Please have the following items available as a backup plan, in case our own gear becomes unavailable.
Guitar Amplifiers
- 2 × Guitar Amps (min. 50W, preferably tube or modeling type)
Bass Amplifier
- 1 × Bass Combo Amp (min. 200W, suitable for live performance)
Microphones, Mic Stands, Cables
- 3 × Vocal/Instrument Microphones (e.g., Shure SM58, SM57, or similar)
- 3 × Boom Stands
- 3 × XLR–XLR Cables (min. 5 meters)
